BRANTHO-KORRUX 3in1 Anti-Rust Coating RAL 9003 Signal white 5 Litres

BRANTHO-KORRUX 3in1 Metal Protection Coating RAL 9003 Signal white 5 Litres

Advantages of BRANTHO-KORRUX 3 in 1 Coating for rust-protection of steel, iron, metal:

Save your money: You only need one paint to complete your job. 3 in 1 is primer and topcoat
BRANTHO-KORRUX 3 in 1 can be used on most of the materials and surfaces. It is well adhering to iron, steel, stainless steel, aluminium, copper and other non-ferrous metals, zinc coatings, glass and paintable hard plastics.
3 in 1 rustproof paint can be applied on fixed rust that cannot be removed.
3 in 1 corrosion protection paint is elastic and does not break even in case the workpiece has been deformed.
BRANTHO-KORRUX 3 in 1 antirust coating has a very high opacity, one layer of this paint is enough to cover the surface. Using paint of other manufacturers you often have to apply two or three layers to obtain this effect. With 3 in 1 you therefore save paint, money and time. 
According to VOB/DIN18363 3 in 1 has been approved as corrosion protection for all steel surfaces, steel structures and steel components.
BRANTHO-KORRUX 3 in 1 has been tested successfully for interior, rural, urban, industrial and marine atmosphere according to DIN 55928 and DIN-EN-ISO 12944 and it is classified as low-emission.
3 in 1 is tested and approved for floating sea marks / buoys.
3 in 1 rust-proof coating has been tested, approved and proven for painting on drilling rigs.
According to DIN-EN 71-3 standard for safety of toys BRANTHO-KORRUX 3 in 1 is resistant to sweat and saliva and can be used for the painting of toys and for painting in factories and areas of food processing.
3 in 1 rust protection paint has proven itself on several million square meters. Including its predecessors it is in use since the 1950s.

Corrosion protection coating with semi-gloss surface
For more gloss mix with 3in1 GLOSS ADDITIVE
For high gloss apply BRANTH's KRISTALL-GLASUR Clear Topcoat

Heat resistant up to +200 °C

Consumption:

6 m² per litre and layer / ca. 30 m² per 5 litre bucket anti-rust coating

Layer thickness applied with paintbrush ca. 70 µ
Apply at least two layers
In case of high loads, e.g. in sea atmosphere, painting on ships and the like: apply three layers
Minimum layer thickness required for corrosion protection of steel and metal: 110 µ

Can be processed with BRANTH's 3in1 HARDENER as two component paint. Mixed with hardener drying-time of BRANTHO-KORRUX 3in1 will be shorter and the surface of the rust protecting paint will be slightly more robust.

For detailed product description, please refer to the regularly available shades and the technical data sheet.

We only supply original BRANTHO-KORRUX 3in1, which is produced by BRANTH in original quality. These paints are not inked with low-grade colouring agents!

Special colour shades are made exclusively to the customer's request and are excluded from exchange and return.